htmlentities

(PHP 4, PHP 5, PHP 7, PHP 8)

htmlentities — Преобразовывает возможные символы в HTML-сущности

Описание

htmlentities(
    string $string,
    int $flags = ENT_QUOTES | ENT_SUBSTITUTE | ENT_HTML401,
    ?string $encoding = null,
    bool $double_encode = true
): string

Функция работает идентично функции htmlspecialchars(), за исключением того, что функция htmlentities() преобразовывает в HTML-сущности каждый символ, для которого в таблице перевода содержится эквивалентная HTML-сущность. Таблицу перевода, которую использует эта функция и которая зависит от констант, которые передали в параметр flags, возвращает функция get_html_translation_table().

Функция html_entity_decode() выполняет обратное преобразование — декодирует HTML-сущности в символы.

Список параметров

string

Входная строка.

flags

Битовая маска из следующих флагов, которые определяют, как обрабатывать кавычки, неправильные последовательности кодовых единиц и тип документа. Маска по умолчанию: ENT_QUOTES | ENT_SUBSTITUTE | ENT_HTML401.

**Доступные константы параметра `flags`**
Название константы	Описание
`ENT_COMPAT`	Преобразовывает двойные кавычки, одинарные кавычки не изменяются.
`ENT_QUOTES`	Преобразовывает как двойные, так и одинарные кавычки.
`ENT_NOQUOTES`	Оставляет без изменения как двойные, так и одинарные кавычки.
`ENT_IGNORE`	Без предупреждения отбрасывает неправильные последовательности кодовых единиц вместо возврата пустой строки. Передача этого флага не рекомендуется, поскольку это » небезопасно.
`ENT_SUBSTITUTE`	Заменяет неправильные последовательности кодовых единиц символом замены Юникода вместо возврата пустой строки: U+FFFD для строк в кодировке UTF-8 и &#FFFD; для строк в других кодировках.
`ENT_DISALLOWED`	Заменяет неверные кодовые точки для заданного типа документа символом замены юникода U+FFFD для строк в кодировке UTF-8 или &#FFFD; для строк в других кодировках вместо того, чтобы оставлять всё как есть. Это бывает полезно для правильного оформления XML-документов, в которые встроили внешнее содержимое.
`ENT_HTML401`	Обрабатывает код по правилам стандарта HTML 4.01.
`ENT_XML1`	Обрабатывает код по правилам стандарта XML 1.
`ENT_XHTML`	Обрабатывает код по правилам стандарта XHTML.
`ENT_HTML5`	Обрабатывает код по правилам стандарта HTML 5.

encoding

Необязательный аргумент, который определяет кодировку для преобразования символов.

Функция примет за значение по умолчанию для параметра encoding значение опции конфигурации default_charset, если параметр опустили.

Хотя технически этот аргумент необязателен, настоятельно рекомендуется указать правильное значение для кода, на случай если значение опции default_charset окажется неправильным для входных данных.

Функция поддерживает следующие кодировки:

**Кодировки, которые поддерживает функция**
Кодировка	Псевдонимы	Описание
ISO-8859-1	ISO8859-1	Западно-Европейская кодировка с набором символов Latin-1.
ISO-8859-5	ISO8859-5	Кириллическая кодировка с набором символов Latin/Cyrillic; применяют редко.
ISO-8859-15	ISO8859-15	Западно-Европейская кодировка с набором символов Latin-9. Добавляет к набору символов Latin-1 кодировки ISO-8859-1 знак евро, французские и финские буквы.
UTF-8		ASCII-совместимая многобайтовая 8-битная кодировка Unicode.
cp866	ibm866, 866	Кириллическая кодировка, которую применяют в семействе операционных систем DOS.
cp1251	Windows-1251, win-1251, 1251	Кириллическая кодировка, которую применяют в операционных системах Windows.
cp1252	Windows-1252, 1252	Западно-Европейская кодировка, которую применяют в операционных системах Windows.
KOI8-R	koi8-ru, koi8r	Русская кодировка.
BIG5	950	Кодировка с набором символов Traditional Chinese (Традиционный китайский), которую применяют в основном на Тайване.
GB2312	936	Стандартная национальная кодировка с набором символов Simplified Chinese (Упрощённый китайский).
BIG5-HKSCS		Кодировка Big5 с расширениями для Гонконга с набором символов Traditional Chinese (Традиционный китайский).
Shift_JIS	SJIS, SJIS-win, cp932, 932	Японская кодировка.
EUC-JP	EUCJP, eucJP-win	Японская кодировка.
MacRoman		Кодировка, которую использовала операционная система Mac OS.
`''`		Пустая строка активирует режим определения кодировки из файла скрипта (Zend multibyte), директивы default_charset и текущей локали (смотрите описание функций nl_langinfo() и setlocale()), в перечисленном порядке. Не рекомендуется использовать.

Замечание: Другие кодировки функция не распознаёт. Вместо других кодировок функция будет использовать кодировку по умолчанию и выдаст предупреждение.

double_encode

Когда параметр double_encode отключён, PHP не будет кодировать существующие HTML-сущности. По умолчанию функция преобразовывает каждый символ.

Возвращаемые значения

Функция возвращает преобразованную строку.

Функция вернёт пустую строку, если входная строка string содержит недопустимую для кодировки encoding последовательность кодовых единиц, если только не установили флаг ENT_IGNORE или ENT_SUBSTITUTE.

Список изменений

Версия	Описание
8.1.0	Значение по умолчанию параметра `flags` изменили с `ENT_COMPAT` на `ENT_QUOTES` \| `ENT_SUBSTITUTE` \| `ENT_HTML401`.
8.0.0	Параметр `encoding` теперь принимает значение null.

Примеры

Пример #1 Пример использования функции htmlentities()

<?php

$str = "A 'quote' is <b>bold</b>";

echo htmlentities($str);
echo "\n\n";
echo htmlentities($str, ENT_COMPAT);

?>

Результат выполнения приведённого примера:

A &#039;quote&#039; is &lt;b&gt;bold&lt;/b&gt;

A 'quote' is &lt;b&gt;bold&lt;/b&gt;

Пример #2 Передача флага ENT_IGNORE

<?php

$str = "\x8F!!!";

// Выводит пустую строку
echo htmlentities($str, ENT_QUOTES, "UTF-8");

// Выводит "!!!"
echo htmlentities($str, ENT_QUOTES | ENT_IGNORE, "UTF-8");

?>

Смотрите также

html_entity_decode() - Преобразовывает HTML-сущности в символы
get_html_translation_table() - Возвращает таблицу преобразований, используемую функциями htmlspecialchars и htmlentities
htmlspecialchars() - Преобразовывает специальные символы в HTML-сущности
nl2br() - Вставляет HTML-код разрыва строки перед каждым переводом строки
urlencode() - Кодирует строку для безопасного включения в структуру URL-адреса

Нашли ошибку?

Инструкция • Исправление • Сообщение об ошибке

＋Добавить

Примечания пользователей 22 notes

down

164

Sijmen Ruwhof ¶

15 years ago

An important note below about using this function to secure your application against Cross Site Scripting (XSS) vulnerabilities.

When printing user input in an attribute of an HTML tag, the default configuration of htmlEntities() doesn't protect you against XSS, when using single quotes to define the border of the tag's attribute-value. XSS is then possible by injecting a single quote:

<?php
$_GET['a'] = "#000' onload='alert(document.cookie)";
?>

XSS possible (insecure):

<?php
$href = htmlEntities($_GET['a']);
print "<body bgcolor='$href'>"; # results in: <body bgcolor='#000' onload='alert(document.cookie)'>
?>

Use the 'ENT_QUOTES' quote style option, to ensure no XSS is possible and your application is secure:

<?php
$href = htmlEntities($_GET['a'], ENT_QUOTES);
print "<body bgcolor='$href'>"; # results in: <body bgcolor='#000&#039; onload=&#039;alert(document.cookie)'>
?>

The 'ENT_QUOTES' option doesn't protect you against javascript evaluation in certain tag's attributes, like the 'href' attribute of the 'a' tag. When clicked on the link below, the given JavaScript will get executed:

<?php
$_GET['a'] = 'javascript:alert(document.cookie)';
$href = htmlEntities($_GET['a'], ENT_QUOTES);
print "<a href='$href'>link</a>"; # results in: <a href='javascript:alert(document.cookie)'>link</a>
?>

down

j2teamnnl at gmail dot com ¶

3 years ago

The answer above is not correct for multiple languages like France
I had correct it
function xml_entities($strIn)
    {
        if (is_numeric($strIn)) {
            return $strIn;
        }
        $strOut = null;

        $arrStr = mb_str_split($strIn);
        foreach ($arrStr as $char) {
            $ord = mb_ord($char);

            if (($ord > 0 && $ord < 32) || ($ord >= 127)) {
                $strOut .= "&amp;#{$ord};";
            }
            else {
                switch ($char) {
                    case '<':
                        $strOut .= '&lt;';
                        break;
                    case '>':
                        $strOut .= '&gt;';
                        break;
                    case '&':
                        $strOut .= '&amp;';
                        break;
                    case '"':
                        $strOut .= '&quot;';
                        break;
                    default:
                        $strOut .= $char;
                }
            }
        }

        return $strOut;
    }

down

q (dot) rendeiro (at) gmail (dot) com ¶

18 years ago

I've seen lots of functions to convert all the entities, but I needed to do a fulltext search in a db field that had named entities instead of numeric entities (edited by tinymce), so I searched the tinymce source and found a string with the value->entity mapping. So, i wrote the following function to encode the user's query with named entities.

The string I used is different of the original, because i didn't want to convert ' or ". The string is too long, so I had to cut it. To get the original check TinyMCE source and search for nbsp or other entity ;)

<?php

$entities_unmatched = explode(',', '160,nbsp,161,iexcl,162,cent, [...] ');
$even = 1;
foreach($entities_unmatched as $c) {
    if($even) {
        $ord = $c;
    } else {
        $entities_table[$ord] = $c;
    }
    $even = 1 - $even;
}

function encode_named_entities($str) {
    global $entities_table;
    
    $encoded_str = '';
    for($i = 0; $i < strlen($str); $i++) {
        $ent = @$entities_table[ord($str{$i})];
        if($ent) {
            $encoded_str .= "&$ent;";
        } else {
            $encoded_str .= $str{$i};
        }
    }
    return $encoded_str;
}

?>

down

2962051004 at qq dot com ¶

7 years ago

<?php

/**
 * 将中文转为Html实体
 * Convert Chinese in HTML to entity
 * Author QiangGe
 * Mail 2962051004@qq.com
 *
*/

$str = <<<EOT
你好 world
EOT;

function ChineseToEntity($str) {
 return preg_replace_callback(
        '/[\x{4e00}-\x{9fa5}]/u', // utf-8 
        // '/[\x7f-\xff]+/', // if gb2312
        function ($matches) {
            $json = json_encode(array($matches[0]));
            preg_match('/\[\"(.*)\"\]/', $json, $arr);
            /*
             * 通过json_encode函数将中文转为unicode
             * 然后用正则取出unicode
             * Turn the Chinese into Unicode through the json_encode function, then extract Unicode from regular.
             * I think this idea is seamless.
            */
            return '&#x'. str_replace('\\u', '', $arr[1]). ';';
        }, $str
   );
}

echo ChineseToEntity($str);
// &#x4f60;&#x597d; world

down

phil at lavin dot me dot uk ¶

15 years ago

The following will make a string completely safe for XML:

<?php
function philsXMLClean($strin) {
        $strout = null;

        for ($i = 0; $i < strlen($strin); $i++) {
                $ord = ord($strin[$i]);

                if (($ord > 0 && $ord < 32) || ($ord >= 127)) {
                        $strout .= "&amp;#{$ord};";
                }
                else {
                        switch ($strin[$i]) {
                                case '<':
                                        $strout .= '&lt;';
                                        break;
                                case '>':
                                        $strout .= '&gt;';
                                        break;
                                case '&':
                                        $strout .= '&amp;';
                                        break;
                                case '"':
                                        $strout .= '&quot;';
                                        break;
                                default:
                                        $strout .= $strin[$i];
                        }
                }
        }

        return $strout;
}
?>

down

hajo-p ¶

11 years ago

The flag ENT_HTML5 also strips newline chars like \n with htmlentities while htmlspecialchars is not affected by that.

If you want to use nl2br on that string afterwards you might end up searching the problem like i did. This does not apply to other flags like e.g. ENT_XHTML which confused me.

Tested this with PHP 5.4 / 5.5 / 5.6-dev with same results, so it seems that this is an intended "feature".

down

realcj at g mail dt com ¶

18 years ago

If you are building a loadvars page for Flash and have problems with special chars such as " & ", " ' " etc, you should escape them for flash:



Try trace(escape("&")); in flash' actionscript to see the escape code for &;



% = %25

& = %26

' = %27



<?php

function flashentities($string){

return str_replace(array("&","'"),array("%26","%27"),$string);

}

?>



Those are the two that concerned me. YMMV.

down

ustimenko dot alexander at gmail dot com ¶

13 years ago

For those Spanish (and not only) folks, that want their national letters back after htmlentities :)

<?php
protected function _decodeAccented($encodedValue, $options = array()) {
    $options += array(
        'quote'     => ENT_NOQUOTES,
        'encoding'  => 'UTF-8',
    );
    return preg_replace_callback(
        '/&\w(acute|uml|tilde);/',
        create_function(
            '$m',
            'return html_entity_decode($m[0], ' . $options['quote'] . ', "' .
            $options['encoding'] . '");'
        ),
        $encodedValue
    );
}
?>

down

wd at NOSPAMwd dot it ¶

13 years ago

Hi there,

after several and several tests, I figured out that dot:

- htmlentities() function remove characters like "à","è",etc when you specify a flag and a charset

- htmlentities() function DOES NOT remove characters like those above when you DO NOT specify anything

So, let's assume that..

<?php

$str = "Hèèèllooo";

$res_1 = htmlentities($str, ENT_QUOTES, "UTF-8");
$res_2 = htmlentities($str);

echo var_dump($res_1); // Result: string '' (length=0)
echo var_dump($res_2); // string 'H&egrave;&egrave;&egrave;llooo' (length=30)

?>

I used this for a textarea content for comments. Anyway, note that using the "$res_2" form the function will leave unconverted single/double quotes. At this point you should use str_replace() function to perform the characters but be careful because..

<?php

$str = "'Hèèèllooo'";

$res_2 = str_replace("'","&#039;",$str);
$res_2 = htmlentities($str);
echo var_dump($res_2); // string '&amp;#039;H&egrave;&egrave;&egrave;llooo&amp;#039;'

$res_3 = htmlentities($str);
$res_3 = str_replace("'","&#039;",$res_3);
echo var_dump($res_3); // string '&#039;H&egrave;&egrave;&egrave;llooo&#039;' --> Nice
?>

Hope it will helps you.

Regards,
W.D.

down

Bassie (: ¶

22 years ago

Note that you'll have use htmlentities() before any other function who'll edit text like nl2br().

If you use nl2br() first, the htmlentities() function will change < br > to &lt;br&gt;.

down

n at erui dot eu ¶

13 years ago

html entities does not encode all unicode characters. It encodes what it can [all of latin1], and the others slip through. &#1033; is the nasty I use. I have searched for a function which encodes everything, but in the end I wrote this. This is as simple as I can get it. Consult an ansii table to custom include/omit chars you want/don't. I'm sure it's not that fast.

// Unicode-proof htmlentities. 
// Returns 'normal' chars as chars and weirdos as numeric html entites.
function superentities( $str ){
    // get rid of existing entities else double-escape
    $str = html_entity_decode(stripslashes($str),ENT_QUOTES,'UTF-8'); 
    $ar = preg_split('/(?<!^)(?!$)/u', $str );  // return array of every multi-byte character
    foreach ($ar as $c){
        $o = ord($c);
        if ( (strlen($c) > 1) || /* multi-byte [unicode] */
            ($o <32 || $o > 126) || /* <- control / latin weirdos -> */
            ($o >33 && $o < 40) ||/* quotes + ambersand */
            ($o >59 && $o < 63) /* html */
        ) {
            // convert to numeric entity
            $c = mb_encode_numericentity($c,array (0x0, 0xffff, 0, 0xffff), 'UTF-8');
        }
        $str2 .= $c;
    }
    return $str2;
}

down

robin at robinwinslow dot co dot uk ¶

14 years ago

htmlentities seems to have changed at some point between version 5.1.6 and 5.3.3, such that it now returns an empty string for anything containing a pound sign:

$ php -v
PHP 5.1.6 (cli) (built: May 22 2008 09:08:44)
$ php -r "echo htmlentities('£hello', null, 'utf-8');"
&pound;hello
$

$ php -v
PHP 5.3.3 (cli) (built: Aug 19 2010 12:07:49)
$ php -r "echo htmlentities('£hello', null, 'utf-8');"
$

(Returns an empty string the second time)

Just a heads up.

down

Waygood ¶

14 years ago

When putting values inside comment tags <!-- --> you should replace -- with &#45;&#45; too, as this would end your tag and show the rest of the comment.

down

admin at wapforum dot rs ¶

14 years ago

A useful little function to convert the symbols in the different inputs.
<?php
function ConvertSimbols($var, $ConvertQuotes = 0) {
if ($ConvertQuotes > 0) {
$var = htmlentities($var, ENT_NOQUOTES, 'UTF-8');
$var = str_replace('\"', '', $var);
$var = str_replace("\'", '', $var);
} else {
$var = htmlentities($var, ENT_QUOTES, 'UTF-8');
}
return $var;
}
?>

Usage with quotes for example message:

$message = ConvertSimbols($message);

Usage without quotes for example link:

$link = ConvertSimbols($link, 1);

down

Jeff ¶

7 years ago

There is a feature when writing to XML using an AJAX call to PHP that rarely is mentioned. I struggled for many hours using htmlentities() because what was getting written to my XML document was not as expected. I naturally assumed that I should be converting my strings before writing them to XML to adhere to XML rules on illegal characters. To my surprise, when converting with htmlentities() or htmlspecialchars() and then writing to an XML file, the resulting ampersands get converted afterwards! Consider the following example:

<?php
$str = "<b>I am cool</b>" ;
$str = htmlentities($str) ;
?>

When you append $str to an XML element and save() the document, you would expect the XML document's source code to look something like this:

<ele>&lt;b&gt;I am cool&lt;/b&gt;</ele>

But that is not what happens. The resulting ampersands get converted by PHP automatically to &amp; and your source code ends up looking like this:

<ele>&amp;lt;b&amp;gt;I am cool&amp;lt;/b&amp;gt;</ele>

As you can see, this creates problems when trying to output the XML data back to HTML. It is important to remember that when writing to XML this way, special characters like ">" and "<"; PHP converts them automatically and there becomes no need to use htmlentities() in certain cases. I assume this feature is in place to aid with passing data through header queries, to avoid reserved characters conflicting with others in a header query (e.g. & or =). Now I understand this may not be the case with older versions of PHP and that this might be a feature of my version (PHP version 5.6.32). With older versions, I assume using htmlentities() or htmlspecialchars() is a must, as stated with previous notes here. Also I use the charset UTF-8 in my HTML and XML and am not sure if this also effects the results I get.

Anyway, I struggled for many hours with using htmlentities() to convert strings for XML writing and saving, when all I had to do was simply not use the function and let PHP convert my strings for me. I hope this helps because I would think I am not the only one who has struggled with this situation.

down

Tom Walter ¶

17 years ago

Note that as of 5.2.5 it appears that if the input string contains a character that is not valid for the output encoding you've specified, then this function returns null.

You might expect it to just strip the invalid char, but it doesn't.

You can strip the chars yourself like so:

iconv('utf-8','utf-8',$str);

You can combine that with htmlentities also:

$str = htmlentities(iconv('UTF-8', 'UTF-8//IGNORE', $str, ENT_QUOTES, 'UTF-8');

Should give you a string with htmlentities encoded to utf-8, and any unsupported chars stripped.

down

steve at mcdragonsoftware dot com ¶

13 years ago

I'm glad 5.4 has xml support, but many of us are working with older installations, some of us still have to use PHP4. If you're like me you've been frustrated with trying to use htmlentites/htmlspecial chars with xml output. I was hoping to find an option to force numeric encoding, lacking that, I have written my own xmlencode function, which I now offer:



usage: 



$string xmlencode( $string )



it will use htmlspecialchars for the valid xml entities amp, quote, lt, gt, (apos) and return the numeric entity for all other non alpha-numeric characters.



-------------------------------------------



<?php 

if( !function_exists( 'xmlentities' ) ) {

    function xmlentities( $string ) {

        $not_in_list = "A-Z0-9a-z\s_-";

        return preg_replace_callback( "/[^{$not_in_list}]/" , 'get_xml_entity_at_index_0' , $string );

    }

    function get_xml_entity_at_index_0( $CHAR ) {

        if( !is_string( $CHAR[0] ) || ( strlen( $CHAR[0] ) > 1 ) ) {

            die( "function: 'get_xml_entity_at_index_0' requires data type: 'char' (single character). '{$CHAR[0]}' does not match this type." );

        }

        switch( $CHAR[0] ) {

            case "'":    case '"':    case '&':    case '<':    case '>':

                return htmlspecialchars( $CHAR[0], ENT_QUOTES );    break;

            default:

                return numeric_entity_4_char($CHAR[0]);                break;

        }        

    }

    function numeric_entity_4_char( $char ) {

        return "&#".str_pad(ord($char), 3, '0', STR_PAD_LEFT).";";

    }    

}

?>

down

jake_mcmahon at hotmail dot com ¶

21 years ago

This fuction is particularly useful against XSS (cross-site-scripting-). XSS makes use of holes in code, whether it be in Javascript or PHP. XSS often, if not always, uses HTML entities to do its evil deeds, so this function in co-operation with your scripts (particularly search or submitting scripts) is a very useful tool in combatting "H4X0rz".

down

h_guillaume at hotmail dot com ¶

15 years ago

I use this function to encode all the xml entities and also all the &something; that are not defined in xml like &trade;
You can also decode what you encode with my decode function.
My function works a little like the htmlentities.
You can also add other string to the array if you want to exclude them from the encoding.

<?php
function xml_entity_decode($text, $charset = 'Windows-1252'){
    // Double decode, so if the value was &amp;trade; it will become Trademark
    $text = html_entity_decode($text, ENT_COMPAT, $charset);
    $text = html_entity_decode($text, ENT_COMPAT, $charset);
    return $text;
}

function xml_entities($text, $charset = 'Windows-1252'){
     // Debug and Test
    // $text = "test &amp; &trade; &amp;trade; abc &reg; &amp;reg; &#45;";
    
    // First we encode html characters that are also invalid in xml
    $text = htmlentities($text, ENT_COMPAT, $charset, false);
    
    // XML character entity array from Wiki
    // Note: &apos; is useless in UTF-8 or in UTF-16
    $arr_xml_special_char = array("&quot;","&amp;","&apos;","&lt;","&gt;");
    
    // Building the regex string to exclude all strings with xml special char
    $arr_xml_special_char_regex = "(?";
    foreach($arr_xml_special_char as $key => $value){
        $arr_xml_special_char_regex .= "(?!$value)";
    }
    $arr_xml_special_char_regex .= ")";
    
    // Scan the array for &something_not_xml; syntax
    $pattern = "/$arr_xml_special_char_regex&([a-zA-Z0-9]+;)/";
    
    // Replace the &something_not_xml; with &amp;something_not_xml;
    $replacement = '&amp;${1}';
    return preg_replace($pattern, $replacement, $text);
}
?>

down

za at byza dot it ¶

17 years ago

Trouble when using files with different charset?



htmlentities and html_entity_decode can be used to translate between charset! 



Sample function:



<?php

function utf2latin($text) {

   $text=htmlentities($text,ENT_COMPAT,'UTF-8');

   return html_entity_decode($text,ENT_COMPAT,'ISO-8859-1');

}

?>

down

-1

chris at ocproducts dot com ¶

8 years ago

This function throws a warning on bad input even if ENT_SUBSTITUTE is set, so be prepared for this.

down

-2

drallen at cs dot uwaterloo dot ca ¶

15 years ago

A pointer to http://www.php.net/manual/en/function.mb-convert-encoding.php if your intention is to translate *all* characters in a charset to their corresponding HTML entities, not just named characters. Non-named characters will be replaced with HTML numeric encoding. eg:

$text = mb_convert_encoding($text, 'HTML-ENTITIES', "UTF-8");

＋Добавить