socket_recv

(PHP 4 >= 4.1.0, PHP 5, PHP 7, PHP 8)

socket_recv — Recibe datos de un socket conectado

Descripción

socket_recv(
    Socket $socket,
    ?string &$data,
    int $length,
    int $flags
): int|false

La función socket_recv() recibe length bytes de datos en data desde socket. socket_recv() puede ser utilizada para recuperar datos desde sockets conectados. Asimismo, los flags permiten modificar el comportamiento de la función.

data se pasa por referencia, por lo que debe estar presente en la lista de argumentos. Los datos recibidos desde la socket por socket_recv() serán devueltos en data.

Parámetros

socket

socket debe ser una instancia de Socket previamente creada por socket_create().

data

Los datos recibidos serán transmitidos en data. Si ocurre un error, si la conexión está cerrada o si no hay datos disponibles, data valdrá entonces null.

length

Hasta length bytes serán leídos desde el host remoto.

flags

El valor de flags puede ser una combinación de los siguientes flags, agrupados mediante el operador OR binario (|).

**Valores posibles de `flags`**
Flag	Descripción
`MSG_OOB`	Trata datos fuera de banda.
`MSG_PEEK`	Recibe los datos desde el inicio de la cola sin eliminarlos de la cola.
`MSG_WAITALL`	Bloquea antes de que al menos `length` bytes sean recibidos. Sin embargo, si se intercepta una señal o la conexión se termina, la función puede devolver menos datos.
`MSG_DONTWAIT`	Si este flag está especificado, la función devolverá datos cuando normalmente habría bloqueado.

Valores devueltos

socket_recv() devuelve el número de bytes recibidos, o false si ha ocurrido un error. El código de error actual puede ser recuperado llamando a socket_last_error(). Este código de error puede ser pasado a la función socket_strerror() para obtener una representación textual del error.

Historial de cambios

Versión	Descripción
8.0.0	`socket` ahora es una instancia de Socket ; anteriormente, era un resource.

Ejemplos

Ejemplo #1 Ejemplos con socket_recv()

Este ejemplo es una reescritura del ejemplo tomado en Ejemplos para utilizar socket_recv().

<?php
error_reporting(E_ALL);

echo "<h2>Conexión TCP/IP</h2>\n";

/* Obtiene el puerto del servicio WWW. */
$service_port = getservbyname('www', 'tcp');

/* Obtiene la dirección IP del host objetivo. */
$address = gethostbyname('www.example.com');

/* Crea un socket TCP/IP. */
$socket = socket_create(AF_INET, SOCK_STREAM, SOL_TCP);
if ($socket === false) {
    echo "socket_create() ha fallado: razón: " . socket_strerror(socket_last_error()) . "\n";
} else {
    echo "OK.\n";
}

echo "Intentando conectar a '$address' en el puerto '$service_port'...";
$result = socket_connect($socket, $address, $service_port);
if ($result === false) {
    echo "socket_connect() ha fallado.\nRazón: ($result) " . socket_strerror(socket_last_error($socket)) . "\n";
} else {
    echo "OK.\n";
}

$in = "HEAD / HTTP/1.1\r\n";
$in .= "Host: www.example.com\r\n";
$in .= "Connexion: Cerrada\r\n\r\n";
$out = '';

echo "Enviando una solicitud HTTP HEAD...";
socket_write($socket, $in, strlen($in));
echo "OK.\n";

echo "Leyendo la respuesta:\n\n";
$buf = 'Este es mi búfer.';
if (false !== ($bytes = socket_recv($socket, $buf, 2048, MSG_WAITALL))) {
    echo "$bytes bytes leídos desde socket_recv(). Cerrando el socket...";
} else {
    echo "socket_recv() ha fallado; razón: " . socket_strerror(socket_last_error($socket)) . "\n";
}
socket_close($socket);

echo $buf . "\n";
echo "OK.\n\n";
?>

Resultado del ejemplo anterior es similar a :

<h2>Conexión TCP/IP</h2>
OK.
Intentando conectar a '208.77.188.166' en el puerto '80'...OK.
Enviando una solicitud HTTP HEAD...OK.
Leyendo la respuesta:

123 bytes leídos desde socket_recv(). Cerrando el socket...HTTP/1.1 200 OK
Date: Mon, 14 Sep 2009 08:56:36 GMT
Server: Apache/2.2.3 (Red Hat)
Last-Modified: Tue, 15 Nov 2005 13:24:10 GMT
ETag: "b80f4-1b6-80bfd280"
Accept-Ranges: bytes
Content-Length: 438
Connexion : Cerrada
Content-Type: text/html; charset=UTF-8

OK.

Found A Problem?

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 13 notes

down

dgk at tcde dot ru ¶

20 years ago

I've used socket_select and socket_recv with a while loop and found myself in trouble when remote side closed connection. The code below produced infinite loop and socket_select returned immediately (which lead to high cpu time consumption).

<?

socket_set_nonblock($my_socket);
$streams = array($my_socket/*, ... */);

$lastAccess = time();
while (socket_select($streams, $write = NULL, $except = NULL, SLEEP_TIME_SECONDS, SLEEP_TIME_MILLISECONDS) !== FALSE) {
    if (in_array($my_socket, $streams)) {
        while (@socket_recv($my_socket, $data, 8192, 0)) {
            echo $data;
        }
        $lastAccess = time();
    } else {
        if (time()-$lastAccess > LAST_ACCESS_TIMEOUT) {
            break;
        }
    }
    // ...
    $streams = array($my_socket/*, ... */);
}

?>

The solution was simple, but quite hard to find because socket_recv is not documented. socket_recv returns FALSE if there is no data and 0 if the socket is widowed (disconnected by remote side). So I had just to check return value of socket_recv. The problem now sounds stupid, but I've spend some time to find it out.
I hope this will save some of somebody's hair ;)

down

ss-130 at yandex dot ru ¶

12 years ago

<?php
$er = error_reporting(0);
$bytes    = socket_recv($socket,$buffer,1,MSG_WAITALL);
error_reporting($er);

// MEGA BUG HERE
// this statuses are wrong and swapped, closed socket must be with "FALSE"
// but in fact he swap the values:
// http://php.net/manual/en/function.socket-recv.php
// 
if($bytes===false){ // no data available, socket not closed
    echo 'WS_READ_ERR1: '.socket_strerror(socket_last_error($socket)).PHP_EOL;
    // print when no data available:
    // WS_READ_ERR1: Resource temporarily unavailable
    continue;
}else if($bytes===0){ // socket closed
    echo 'WS_READ_ERR2: '.socket_strerror(socket_last_error($socket)).PHP_EOL;
    // print when socket closed:
    // WS_READ_ERR2: Success
    $process->close();
}

?>

down

m_lajos at hotmail dot com ¶

11 years ago

Workaround for the missing MSG_DONTWAIT flag according to the bug report page:

<?php if(!defined('MSG_DONTWAIT')) define('MSG_DONTWAIT', 0x40); ?>

down

rathamahata at rathamahata dot net ¶

19 years ago

It looks like that mysterious flags are just the recv(2) flags passed to your OS syscall and nothing more...

ext/sockets/sockets.c:PHP_FUNCTION(socket_recv)
...
        if ((retval = recv(php_sock->bsd_socket, recv_buf, len, flags)) < 1) {
                efree(recv_buf);
...

for linux you can type `man 2 recv' and you will see complete description of thouse flags.

Sergey S. Kosrtyliov <rathamahata@rathamahata.net>
http://www.rathamahata.net/

down

bastiaan at [no-spam] megabass dot nl ¶

21 years ago

in case you want to empty/unset $buffer, but failing to do so, try using 0 as flag.
PHP_NORMAL_READ and PHP_BINARY_READ respectively hold 1 and 2 as value.

down

davide dot renzi at gmail dot com ¶

13 years ago

In PHP version 5.* there is a bug: MSG_DONTWAIT flag is not defined (see https://bugs.php.net/bug.php?id=48326)

down

lexkrstn at gmail dot com ¶

6 years ago

It seems like the flags are just passed to the underlying recv() function of your OS, hence there no MSG_DONTWAIT flag on Windows and you should not define it yourself in that case, it just won't work.

down

-1

Anonymous ¶

4 years ago

<?php

namespace Safe;

use Safe\Exceptions\SocketsException;

/**
 * After the socket socket has been created
 * using socket_create, bound to a name with
 * socket_bind, and told to listen for connections
 * with socket_listen, this function will accept
 * incoming connections on that socket. Once a successful connection
 * is made, a new socket resource is returned, which may be used
 * for communication. If there are multiple connections queued on
 * the socket, the first will be used. If there are no pending
 * connections, socket_accept will block until
 * a connection becomes present. If socket
 * has been made non-blocking using
 * socket_set_blocking or
 * socket_set_nonblock, FALSE will be returned.
 *
 * The socket resource returned by
 * socket_accept may not be used to accept new
 * connections. The original listening socket
 * socket, however, remains open and may be
 * reused.
 *
 * @param resource $socket A valid socket resource created with socket_create.
 * @return resource Returns a new socket resource on success. The actual
 * error code can be retrieved by calling
 * socket_last_error. This error code may be passed to
 * socket_strerror to get a textual explanation of the
 * error.
 * @throws SocketsException
 *
 */
function socket_accept($socket)
{
    error_clear_last();
    $result = \socket_accept($socket);
    if ($result === false) {
        throw SocketsException::createFromPhpError();
    }
    return $result;
}

/**
 * Create a Socket resource, and bind it to the provided AddrInfo resource.  The return
 * value of this function may be used with socket_listen.
 *
 * @param resource $addr Resource created from socket_addrinfo_lookup.
 * @return resource Returns a Socket resource on success.
 * @throws SocketsException
 *
 */
function socket_addrinfo_bind($addr)
{
    error_clear_last();
    $result = \socket_addrinfo_bind($addr);
    if ($result === null) {
        throw SocketsException::createFromPhpError();
    }
    return $result;
}

down

Anonymous ¶

20 years ago

I'm glad that Bastion left the above post about the mysterious int flag. He just helped to fix a problem that I've spent six hours on. Here's my code:

for($ct=1; $ct<=$numrecs; $ct++) {
     $rec = "";
     $nr=socket_recv($fp,$rec,77,0);
     print "Rec # $ct -->";
         print "$rec";
         print "<br>";
      }

The code is pretty simple, it just loops through all my records and prints them out. All records are 77 bytes and all end with a period. The first 36 records print perfectly then at 37 things go bad. The records start to get offset. The last few characters of the 37th record end up printing on the 38th record. The data on the sending side was perfect, so I knew that the problem was with socked_recv.

After reading the above post I tried changing the int flag. Changing the flag to 2 worked:
$nr=socket_recv($fp,$rec,77,2);

Now everything lines up perfectly. I had always left int flag as 0 since it's undocumented. 

Martin K.

down

-1

Anonymous ¶

20 years ago

My last post was incorrect. The int flag set to 2 apparently reset the file position pointer so what I was reading was the first record repeatedly. 

My workaroud ended up being the following:

for($ct=1; $ct<=$numrecs; $ct++) {
    $rec = "";
    $nr=socket_recv($fp,$rec,76,0);
        
    //grab the extra bytes.
    $terminator = "";
    while ($terminator != ".") {
        $nr=socket_recv($fp,$terminator,1,0);
    }
    
     $custarray[]=substr($rec,0,76);         
}

Martin K.

down

-2

engine at [NO SPAM] illusiononly dot com ¶

20 years ago

To read from socket both on linux and windows OS having  flash as a client I use function bellow. $length is the size of  a chunk, not the max length to read. It will continue reading until EOL char  occures or client disconnects (or in case of error), so it works for bigger packets as well.

     function read($descriptor, $length = 1024) {
            $this->method = "read";
            if(!$client){
                echo("No valid socket descriptor !\n");
                return false;
            }
            $read ='';
        while(($flag=socket_recv($descriptor, $buf, $length,0))>0){
              $asc=ord(substr($buf, -1));
            if ($asc==0) {
                $read.=substr($buf,0,-1);
                break;
            }else{
                $read.=$buf;
            }
        }
           if ($flag<0){
            //error
            return false;
        }elseif ($flag==0){
            //Client disconnected
            return  false;
        }else{
              return $read;
        }

     }

down

-3

cottton at i-stats dot net ¶

10 years ago

socket_recv()
returns FALSE if client returned no data
returns 0 (zero) if client disconnected

also (asuming case socket_select() "gave" us a "changed" socket):
if 
socket_recv() returned FALSE 
and no bytes were received 
then
client "crashed" (call it disconnected).

else if
socket_recv() returned 0 (zero) 
and no bytes were received 
then
client "normaly" disconnected.

Im pretty sure -- 99.99%.
Example:
<?php
function receive($socket)
{
    // !
    // on all following cases we assume that
    // socket_select() returned the current socket as "changed"
    // !

    $timeout = 3; // set your timeout

    /* important */
    $socket_recv_return_values['no_data_received'] = false;
    $socket_recv_return_values['client_disconnected'] = 0;

    $start = time();
    $received_data = null;
    $received_bytes = null;
    socket_set_nonblock($socket);
    socket_clear_error();
    while(
        ($t_out=((time()-$start) >= $timeout)) === false
        and ($read=@socket_recv($socket, $buf, 4096, 0)) >= 1
    ){
        $received_data  = (isset($received_data)) ? $received_data . $buf : $buf;
        $received_bytes = (isset($received_bytes)) ? $received_bytes + $read : $read;
    }
    $last_error = socket_last_error($socket);
    socket_set_block($socket);

    if($t_out === true){
        throw new Exception(
            'timeout after ' . ((!$received_bytes) ? 0 : $received_bytes) . ' bytes',
            0 // your eCode here
        );
    }
    elseif($last_error !== false and $last_error !== 0){
        throw new Exception(
            socket_strerror($last_error),
            $last_error
        );
    }
    else{
        if($read === $socket_recv_return_values['no_data_received']){
            // client returned NO DATA
            // but we were in a loop and could have got some data before:
            if($received_bytes < 1){
                // client is connected but sent NO DATA ?
                // no:
                // in this case the client must be "crashed" because -
                // it is not possible to "send no data" (zero bytes)
                // socket_select() now returns this socket as "changed" "forever"
                throw new Exception(
                    'client crashed',
                    0 // your eCode here
                );
            }else{
                // client returned DATA
                return $received_data;
            }
        }
        elseif($read === $socket_recv_return_values['client_disconnected']){
            // client disconnected
            if($received_bytes < 1){
                // client disconnected before/without sending any bytes
                throw new Exception(
                    'client disconnected',
                    0 // your eCode here
                );
            }
            else{
                // *this value* ^= $socket_recv_return_values['client_disconnected']
                //
                // client disconnected AFTER sending data (we were in a loop!)
                // socket_select() will return this socket "forever" as "changed" and -
                // socket_recv() will return *this value* "forever".
                // we will be "back" again "very soon" to see:
                //  socket_recv() returns *this value* AND no bytes received
                //  which results in disconnect-exception above
                return $received_data;
            }
        }
    }
}
?>

down

-3

e-vela at bol dot com dot br ¶

7 years ago

Usage example for MSG_PEEK: this function tells if the socket has data available to be read, but preserving it to be read at a future moment.

<?php
// Workaround for the missing define
if(!defined('MSG_DONTWAIT')) define('MSG_DONTWAIT', 0x40);

// Function to check if there is data available in the socket
function SocketHasData($socket) {
    // Based on the following fact:
    // $result=0 -> disconnected, $result=false -> no data

    $data = ''; // We need a buffer, but we won't use it

    // MSG_PEEK means to preserve data in the queue, so it can
    // actually be read afterwards
    $result = socket_recv($socket, $data, 1, MSG_PEEK | MSG_DONTWAIT );

    if ($result === false) return false; // If no data, returns false
    return true; // Otherwise returns true
}
?>

＋add a note