Opciones de contexto HTTP

Opciones de contexto HTTP — Lista de opciones de contexto HTTP

Descripción

Opciones de contexto para los protocolos http:// y https://.

Opciones

method string

GET, POST, o cualquier otro método HTTP soportado por el servidor remoto.

Por omisión, vale GET.

header array o string

Encabezados adicionales a enviar durante la petición. Los valores de esta opción sobrescribirán otros valores (como User-agent:, Host:, y Authentication:), incluso al seguir redirecciones Location:. Por lo tanto, no se recomienda definir el encabezado Host:, si follow_location está activado.

Una cadena debe contener pares Clave : valor delimitados por \r\n, por ejemplo : "Content-Type: application/json\r\nConnection: close". Un array debe contener una lista de pares Clave : valor, por ejemplo : ["Content-Type: application/json", "Connection: close"].

user_agent string

Valor a enviar con el encabezado User-Agent:. Este valor solo debe ser utilizado si el agente de usuario no está especificado en la opción de contexto header anterior.

Por omisión, se utilizará el valor de la opción de configuración user_agent del archivo php.ini.

content string

Los datos adicionales a enviar después de los encabezados. Típicamente utilizados durante las peticiones POST o PUT.

proxy string

URI de la dirección del proxy (ej. tcp://proxy.example.com:5100).

request_fulluri booleano

Cuando se define como true, la URI completa será utilizada al construir la petición (ej. GET http://www.example.com/path/to/file.html HTTP/1.0). Aunque este formato de petición no es estándar, algunos servidores de proxy lo requieren.

Por omisión, vale false.

follow_location int

Sigue las redirecciones Location. Debe definirse como 0 para desactivar.

Por omisión, vale 1.

max_redirects int

El número máximo de redirecciones a seguir. El valor 1 o inferior significa que ninguna redirección será seguida.

Por omisión, vale 20.

protocol_version número decimal

Versión del protocolo HTTP.

Por omisión, vale 1.1 a partir de PHP 8.0.0; antes de esta versión el valor por omisión era 1.0.

timeout número decimal

Tiempo máximo de espera para la lectura, en forma de número decimal (ej. 10.5).

Por omisión, se utilizará el valor de la opción de configuración default_socket_timeout del archivo php.ini.

ignore_errors booleano

Obtiene el contenido incluso al recibir un código de error.

Por omisión, vale false.

Ejemplos

Ejemplo #1 Obtención de una página y envío de datos POST

<?php

$postdata = http_build_query(
    [
        'var1' => 'du contenu',
        'var2' => 'doh',
    ]
);

$opts = ['http' =>
    [
        'method'  => 'POST',
        'header'  => 'Content-type: application/x-www-form-urlencoded',
        'content' => $postdata,
    ]
];

$context = stream_context_create($opts);

$result = file_get_contents('http://example.com/submit.php', false, $context);

?>

Ejemplo #2 Ignora las redirecciones pero obtiene los encabezados y el contenido

<?php

$url = "http://www.example.org/header.php";

$opts = ['http' =>
    [
        'method' => 'GET',
        'max_redirects' => '0',
        'ignore_errors' => '1',
    ]
];

$context = stream_context_create($opts);
$stream = fopen($url, 'r', false, $context);

// información sobre los encabezados y metadatos del flujo
var_dump(stream_get_meta_data($stream));

// datos actuales de $url
var_dump(stream_get_contents($stream));
fclose($stream);
?>

Notas

Nota: Opciones de contexto del flujo subyacente
Opciones de contexto adicionales pueden ser soportadas por el transporte subyacente. Para los flujos http://, consulte las opciones de contexto del transporte tcp://. Para los flujos https://, consulte las opciones de contexto del transporte ssl://.

Nota: Línea de estado HTTP
Cuando este manejador de flujo sigue una redirección, wrapper_data, devuelto por la función stream_get_meta_data() no debe contener necesariamente la línea de estado HTTP que se aplica a los datos de contenido en el índice 0.
array (
  'wrapper_data' =>
  array (
    0 => 'HTTP/1.0 301 Moved Permanently',
    1 => 'Cache-Control: no-cache',
    2 => 'Connection: close',
    3 => 'Location: http://example.com/foo.jpg',
    4 => 'HTTP/1.1 200 OK',
    ...
La primera petición devuelve una 301 (redirección permanente), por lo tanto, el manejador de flujo sigue automáticamente la redirección para obtener una respuesta 200 (índice = 4).

Ver también

Found A Problem?

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 12 notes

down

nate ¶

11 years ago

Note that if you set the protocol_version option to 1.1 and the server you are requesting from is configured to use keep-alive connections, the function (fopen, file_get_contents, etc.) will "be slow" and take a long time to complete. This is a feature of the HTTP 1.1 protocol you are unlikely to use with stream contexts in PHP.

Simply add a "Connection: close" header to the request to eliminate the keep-alive timeout:

<?php
// php 5.4 : array syntax and header option with array value
$data = file_get_contents('http://www.example.com/', null, stream_context_create([
    'http' => [
        'protocol_version' => 1.1,
        'header'           => [
            'Connection: close',
        ],
    ],
]));
?>

down

daniel dot peder at gmail dot com ¶

8 years ago

note that for both http and https protocols require the same 'http' context keyword:

<?php

// CORRECT example:
// this will work as expected
// note the url with https but context with http
$correct_data = file_get_contents('https://example.com', false, stream_context_create(array('http' => array(...))));

// INVALID example:
// this will not work, the context will be ignored
// note the url with https also context with https
$correct_data = file_get_contents('https://example.com', false, stream_context_create(array('https' => array(...))));

down

ASchmidt at Anamera dot net ¶

4 years ago

With the default of 

    'follow_location'   =>  1

be certain NEVER include a "Host:" header in the 'header' array.

If the host is set to "mydomain.com", and that web site has a (quite common) redirect to "www.mydomain.com", then the initial request to "http://mydomain.com" will get the expected response of:

HTTP/1.1 301 Moved Permanently
Location: http://www.mydomain.com/

However, the follow-up request does NOT replace the original "host" header with the new "location" value, as one would expect. Consequently each "follow-location" request will again be served by the original host of "http://mydomain.com", and continue the redirect loop until 'max_redirects' has been exhausted.

(For details: https://bugs.php.net/bug.php?id=77889)

down

daniel.peder (a) gmail.com ¶

8 years ago

note that both http and https transports require the same context name http

// OK example:
// this will work as expected
// note the url with https but context with http
$correct_data = file_get_contents('https://example.com', false, stream_context_create(array('http' => array(...))));

// INVALID example:
// this will not work, the context will be ignored
// note the url with https also context with https
$correct_data = file_get_contents('https://example.com', false, stream_context_create(array('https' => array(...))));

down

ywarnier at beeznest dot org ¶

8 years ago

Note that setting request_fulluri to true will *change* the value of $_SERVER['REQUEST_URI] on the receiving end (from /abc.php to http://domain.com/abc.php).

down

gourav sarkar ¶

14 years ago

watch your case when using methods (POST and GET)...it must be always uppercase. in case of you write it in lower case it wont work.

down

aruntechguy at outlook dot com ¶

8 years ago

If you want to use Basic Auth while using get_headers(), use stream_context options below. 

I am using HEAD method here, but please feel free to use GET also.

<?php
$targetUrl = 'http or https target url here';
$basicAuth = base64_encode('username:password');

stream_context_set_default(
    [
        'http' => [
            'method' => 'HEAD',
            'header' => 'Authorization: Basic ' . $basicAuth
        ]
    ]
);
$result = get_headers($targetUrl);

print_r($result);

down

njt1982 at yahoo dot com ¶

1 year ago

It's worth noting that the `header` array seems to only want an array of strings, not an associative array.

I just spent a chunk of time debugging something not working as expected (no errors though) which was fixed by converting an associative array of headers into a simple array of strings.

down

vchampion at gmail dot com ¶

13 years ago

If you use the proxy server and encounter an error "fopen(http://example.com): failed to open stream: HTTP request failed! HTTP/1.0 400 Bad Request" note that in many situations you need also set the parameter "request_fulluri" to "true" in your stream options. Without this option the php script sends the empty request to the server as "GET / HTTP/0.0" and the proxy server replies to it with the "HTTP 400" error. 



For example (working sample): 

<?php

$stream = stream_context_create(Array("http" => Array("method"  => "GET",

                                                      "timeout" => 20,

                                                      "header"  => "User-agent: Myagent",

                                                      "proxy"   => "tcp://my-proxy.localnet:3128",

                                                      'request_fulluri' => True /* without this option we get an HTTP error! */

                                )));



if ( $fp = fopen("http://example.com", 'r', false, $stream) ) {

    print "well done";

}

?>



P>S> PHP 5.3.17

down

jay ¶

10 years ago

Remember to match content with Content-type:

<?php

$data = array(
    'var1' => 'some content',
    'var2' => 'doh'
);

$opts = array('http' =>
    array(
        'method'  => 'POST',
        'header'  => 'Content-type: application/json',  // here...
        'content' => json_encode($data)  // and here.
    )
);

. . .

?>

down

chris ¶

11 years ago

I had quite a bit of trouble trying to make a request with fopen through a proxy to a secure url.  I kept getting a 400 Bad Request back from the remote host.  It was receiving the proxy url as the SNI host.  In order to get around this I had to explicity set the SNI host to the domain I was trying to reach.  It's apparently the issue outlined in this bug: 

https://bugs.php.net/bug.php?id=63519

<?php
$domain = parse_url($file, PHP_URL_HOST);
$proxy_string = "tcp://" . WP_PROXY_HOST  . ":" . WP_PROXY_PORT;
$opts = array( 
    'http' => array( 'proxy' => $proxy_string ),
    'ssl' => array( 'SNI_enabled' => true, 'SNI_server_name' => $domain));
$context = stream_context_create($opts);
$handle = fopen( $file, 'r', false, $context );
?>

down

bigtree at 29a dot nl ¶

7 months ago

If you pass the 'header' option as a string and you have multiple headers, they must be separated by "\r\n".

＋add a note